Installation Method Of Nylon Trimmer Line

- Sep 21, 2020-

Installation method of nylon trimmer line


As an important tool in agricultural production, the lawn mower has the most direct impact on the yield of crops. Its invention is a major advancement in human civilization. Lawn mower, also known as lawn mower, lawn mower, lawn trimmer, etc., is a mechanical tool for mowing lawns and vegetation. It is composed of cutter head, engine, walking wheel, walking mechanism, blade, armrest, and control And other parts. The blade uses the high-speed rotation of the engine to greatly increase the output speed, which saves the work time of weeders and reduces a lot of human resources. Today, I will mainly tell you how to install the mowing rope.


Installation method of lawn mower mowing rope


Disassemble the mowing head, then take out the inner core and wrap the mowing rope.


The length of the mowing rope should not be too long, 10-15cm is suitable, it is not easy to hit, it is not easy to control, and it is easier to break. When installing, tie a knot on the shaft or the mowing head, and pull out the rope from the opposite direction, otherwise the rope will fall off during the mowing process; the length of the mowing rope at both ends should be the same, otherwise the mowing chance will shake due to imbalance . The mowing rope of the lawn mower is only suitable for cutting young grass. If it is too thick, or even the old grass that has been lignified, it needs to be cut with a blade.

How to wind the brush cutter mowing rope?


1. Take off the mowing head, there is a place for the mowing rope inside.


2. Fold the mowing rope in half, jam it in the place where the mowing rope is wound, and wind it inside.


3. When the entanglement is almost finished, thread the straw rope out of the grooves on both sides.